21V Brushless Direct Drive Three-Speed 125mm Cordless Angle Grinder

DESCRIPTION OF CORDLESS ANGLE GRINDER

Cut, grind and finish with the CAGH 21V brushless cordless angle grinder. A direct-drive brushless motor spins a 125 mm wheel up to 9,000 rpm, and three selectable speed settings let you match output to cutting discs, grinding wheels and flap discs instead of running everything flat out. The M14 spindle accepts standard 125 mm accessories, while the auxiliary side handle keeps two-handed control during long cuts. Two 4.0Ah 21V batteries and a blow-mould case are included, and the tool runs on the Makita-type battery platform so packs are shared across your kit.

USAGE OF CORDLESS ANGLE GRINDER

• Rebar, angle iron and pipe cutting — High speed with a 125 mm cutting disc for site cuts where a mains lead won't reach.

• Weld preparation and clean-up — Bevel edges, dress welds and remove spatter at mid speed with a grinding wheel.

• Rust, paint and scale removal — Low speed for wire cup brushes and flap discs, keeping heat down on thin sheet.

• Deburring and edge finishing — Three speeds let you step down from stock removal to a finer surface finish.

• Tile, block and stone cutting — Diamond disc work at high speed for bathroom, kitchen and landscaping cuts.

TECHNICAL PARAMETERS OF CORDLESS ANGLE GRINDER